Technical Parameters:

1. Permanent magnet DC motor voltage: 12/24/36/48VDC

2. Maximum Push/Pull Force: 700KG/700KG

3. Standard stroke: S=(50/100/150/200/300mm), can be customized according to customer requirements.

4. The shortest installation distance (the distance between the center of the two holes before and after the inner tube is fully retracted): L=S+250mm; the inner tube is fully extended to the center of the two holes before and after the distance = 2*S(stroke)+250mm

5. No-load speed: maximum 60mm/s

6. Rated load rate: 5mm/s (700KG) to 60mm/s (50KG)

7. Ambient temperature: -26°C to 65°C

8. Standard protection level: IP65

9. Built-in limit switch, configurable potentiometer

10. Low noise design, noise level below 70dB