Technical Parameters:

1. Permanent magnet DC motor voltage: 12/24/36/48VDC

2. The maximum push / pull force: 120KG/120KG

3. Standard stroke: S = (50, 100, 150, 600) mm, can be customized according to customer requirements.

4. The shortest installation distance (center distance between two holes before and after the inner tube is fully retracted): L = S (stroke) + 105mm; the inner tube is fully extended to the center of the hole before and after the distance = 2*S (stroke) +105mm

5. No-load speed: up to 40mm/s

6. Rated load rate: 5mm/s(120KG)-40mm/s(10KG)

7. Ambient temperature: -26°C to 65°C

8. Standard protection class: IP54/IP65

9. Built-in travel switch

10. Low noise design, noise level below 70dB

11. Can be equipped with wire or wireless remote control